POWER SUPPLIES and AC SOURCES,  SALES and REPAIR

Agilent, Artesyn, Aztec, HP, Elgar, EMS, TDK Lambda, Power One, Power Ten,

Sanden, Sangen, Sorensen, Tektronix, Voltex, Xantrex


Phone: 650-261-1711            Back To EquipTek Labs Home Page                            E-MAIL US

MAKE MODEL AC POWER SOURCES Price US$
California Instruments   1001T AC power source, 1000Wt,  0-270VAC, 45Hz-5kHz , 0.1Hz Resolution,  850T oscillator  Pic

1495

Elgar 1751SX-14 AC power source with  9012 variable frequency plug-in and GPIB interface

2500

Elgar 9012 Variable frequency plug-in for Elgar 1751SX AC power source

995

ELECTRONIC LOADS

AC/DC EL300 Electronic load. 300Wt max. Hi/Low range, small size Pic 390
Transistor Devices DLP50-60-1000A 1000Wt, 60A, Static or dynamic mode. Three current ranges: 6, 18, 60A. Pic 650
Transistor Devices DLP50-20-100 Electronic load with LCD displays. Hi/Lo range, Constant current or constant voltage mode. Available as a bank of 4 units. 250

SINGLE OUTPUT DC LAB POWER SUPPLIES  listed by output voltage rating

Lambda ZUP6-33 0-6VDC, 0-33A, Programmable power supply. RS-232/485 interface. Compact high efficiency design. Pic 495
Xantrex XFR7.5-130 0-7.5V, 0-130A. Desktop size. ii 895
Xantrex XFR7.5-140 0-7.5V, 0-140A. Only 1.5" inches high.. 995
EMI EMS7.5-75-1-D 0-7.5V, 0-75A, Constant current or voltage mode. Only 1.5" high. Digital high resolution displays. 595
HP 6281A 0-7.5V, 0-5A, Constant current or voltage mode. Add PC interface for $125 (GPIB) 195
Agilent 6611C 0-8V, 0-5A Programmable power supply.5mV programmable accuracy. 0.5mV Rms ripple 295
EMS TCR7.5S300 0-7.5V, 0-300A, Constant current or voltage mode. FREE GPIB controller! For use on 190-250VAC lines 1650
Kikusui PAD8-5L 0-8V, 0-5A, Constant current or voltage mode. Small size. Linear design 150
Agilent 66101A 0-8V, 0-16A, programmable plug-in for the Agilent 66000A mainframe 450
HP 6282A 0-10V, 0-10A Const voltage or Current mode. Add PC interface for $125 (GPIB) 295
EMI EMS10-60-1-D 0-10V, 0-60A, Constant current or voltage mode. Only 1.5" high.  Digital high resolution displays. 495
Lambda LT801-V1 5-12V, 0-100A Adjustable power supply. Const. Voltage or Current modes, Digital display, very compact and light weight. Line voltage: 208-260 VAC 590
HP E3610A 0-15V @ 0-2A or 0-8V @ 0-3AConstant current or voltage mode. 195
Kepco ATE15-3 0-15V, 0-3A Constant current or voltage mode. Remote programming. Fast response Add GPIB interface for $95. 195
Sorensen XTS15-4 0-15V, 0-4A Constant current or voltage mode. With opt GPIB-M 395
Xantrex XTS15-4 0-15V, 0-4A Constant current or voltage mode. With opt GPIB-M 395
Sorensen HPD15-20S 0-15V, 0-20A Constant current or voltage mode. Digital display with analog bargraph. pic 350
Xantrex HPD15-20S 0-15V, 0-20A Constant current or voltage mode. Digital display with analog bargraph. pic 350
Lambda LLS4018 0-18V, 0-2A, Const current or voltage mode, digital controls & displays. 295
Kikusui PMC18-5A 0-18V, 0-5A, Const current or voltage mode, digital displays, remote sensing, ON/OFF sw. 175
Lambda LLS6018 0-18V, 0-9A, Const current or voltage mode, digital controls & displays. Small size Simulate solar panel output for inverter testing 395
HP 6111A 0-20V, 0-1A. 5 decades of resolution permit setting output voltage with 1mV  accuracy 350
Agilent E3615A 0-20V, 0-3A.  Digital displays. IN STOCK 245
HP 6264B 0-20 VDC, 0-20A, Voltage Regulation 0.01%. Add PC interface for $125 (GPIB) Simulate 220Wt solar panel output for inverter testing. (GPIB interface with HP59501A) 450
HP 6284A 0-20V, 0-3A Constant current or voltage mode. Add PC interface for $125 (GPIB) 250
HP 6552A 0-20V, 0-25A New surpus units. Free rack mount kit. Simulate 500Wt solar panel output for inverter testing. Free GPIB interface 995
HP 6033A 0-20V, 0-30A. Autoranging, 240Wt max. GPIB interface. 950
HP 6261B 0-20V, 0-50A, Linear, Const. voltage or current. 115VAC (opt 26), 10 turn V/A pots (opt 9). GPIB interface with HP59501A 690
Amrel SPS20-60-000 0-20V, 0-60A. Digital displays, only 1.5" high, 19" rack ready. Optional GPIB is available pic 450
Amrel SPS20-60-002 0-20V, 0-60A. Digital displays, only 1.5" high, 19" rack ready. Optional GPIB interface. pic 650
Lambda LGSF24 24V, 41Amp, LED readout for V & A. Model # LGS-F-24-0V-R 275
Power Ten 4600D-20125 0-20V, 0-125A, LCD displays, Const current or voltage mode. Line requirements: 190-253VAC sinlge or 3 phase 950
HP 6215A 0-25V, 0-400 mA. Const voltage or const current. 1mV ripple,  size: 5.25x3.25x8"  Fine Volt/Amp controls.  Pic 65
HP 6216A 0-25V, 0-400 mA. Const voltage  or const. current. 1mV ripple,  size: 5.25x3.25x8"  Fine Volt/Amp  adj.  Pic 65
Fluke PM2811 0-30V, 0-10A, 60Wt max., GPIB programmable. IN STOCK. 350
Sorensen DCS33-33E 0-33V, 0-33A, opt M9; GPIB/RS232. IN STOCK. 850
Kikusui PAD35-5 0-35V, 0-5A  Compact size, Remote control. Master/slave mode with tracking. Pic  add GPIB for $125 250
Lambda ZUP36-6 0-36V, 0-6A, Programmable lab power supply. RS-232/RS485. Very small footprint. 450
HP 6334B 0-36V, 0-10A, Constant current or   voltage, Only 3" high. Volt and amp meter 350
HP 6104A 0-40V @1A  or  2A from 0 to 20V. Precision power supply. Line regulation: 0.0005%+40uV, Load regulation: 0.0005%+100uV, Drift: 0.005%+50uV  pic 150
Kenwood PD35-20D 0-35V, 0-20A  Digital displays, constant current or voltage modes. Linear design with extremely quiet output. Pic 650
Lambda ZUP36-24 0-36V, 0-24A, Programmable lab power supply. RS-232/RS485 850
Lambda LP-412A-FM 0-40V, 0-1A lab power supply, constant current or voltage mode, Separate V and A meters. Low noise and low ripple. 75
Lambda LP-522FM 0-40V, 0-2A lab power supply, constant current or constant voltage modes, Analog meters. Compact size 120
Lambda LP-532FM 0-40V, 0-3A lab power supply, constant current or constant voltage modes, analog meters for V and A. Low noise and low ripple. Line regulation: 0.01%  180
Lambda LQ-532 0-40V, 0-5A. Digital display. Constant current or constant voltage mode. Remote control capability

295

HP 6200B 0-40 V, 0-0.75A, or 0-20V at 0-1.5A.  Constant voltage or current. Regulation: 0.01%.

175

HP 6266B 0-40 V, 0-5A, Constant voltage or current. Regulation: 0.01%. Add PC interface for $125 (GPIB) Pic

285

EMS ESS-40-25 0-40V, 0-25A, Constant voltage or current mode. LCD displays, 1.5" height. (add GPIB for $100)

790

HP 6268B 0-40V, 0-30A, Constant voltage/constant  current mode. Regulation 0.01%. opt 26 & 28 avail. (GPIB interface with HP59501A)

750

Xantrex XFR40-30 0-40V, 0-30V System power supply. 1.5" height 1095
EMI EMS40-125-2-D 0-40V, 0-125A, Constant current or voltage mode. Digital high resolution. Requires 3 phase AC. 1150
Prism PPS 50S-1 0-50V, 0-1A,  Programmable power supply. GPIB interface. High resolutions (4 digit) Pic

175

Sorensen DCS50-40M16 0-50V, 0-40A,  1 or 3 phase  AC input, current monitor output.      490
Power Design 6050A 0-60V at 500 mA or 0-6V at 6A Dual range

185

Lambda LQ-523 0-60 V, 0-900 mA, digital V/A display, CV/CC mode, small size. Remote analog programming

120

Sorensen XTS60-1 0-60V, 0-1A Constant current or voltage mode. Digital display with analog bargraph 350
Xantrex XTS60-1 0-60V, 0-1A Constant current or voltage mode. Digital display with analog bargraph 350
Sorensen QRD60-1.5 0-60V, 0-1.5A Constant current or voltage mode. 150
HP 6012A 0-60V, 0-50A, 1000Wt. 90day warranty. 995
HP 6206B 0-60V @ 0.5A or 0-30 @ 1A dual range. 0.01% regulation, 200uV rms ripple 170
Power Design 6050A 0-60V @ 0.5A or 0-6V @ 6A dual range. 006 195
Sorensen XTS60-1 0-60V, 0-1A Dual output. Constant current or voltage mode. Digital display with analog bargraph. Pic 295
Xantrex XTS60-1 0-60V, 0-1A  Dual output. Constant current or voltage mode. Digital display with analog bargraph. Pic 295
HP 6294A 0-60V, 0-1A Constant current or constant voltage mode. 0.01% regulation. Linear.

175

HP 6296A 0-60V, 0-3A Constant current or constant voltage mode. 0.01% regulation. Linear.

350

Lambda LQ-533 0-60V, 0-3.3A. Digital display. Constant current or constant voltage mode. 0.01% regulation.

350

Agilent 6544A 0-60V, 0-3.5A IN STOCK!

850

HP 6034L 0-60V, 0-10A, 200Watt max., Computer programmable (GPIB)  pic

650

Power Ten 3300D-6010 0-60V, 0-10A, LCD displays, Height:  1.5" Const current or voltage mode. pic

695

HP 6554A 0-60V, 0-9A, 540Wt, Programmable accuracy: 26mV/8mA. List price $3,724. IN STOCK 975
HP 6274B 0-60V, 0-15A, Const voltage or Current mode.  Analog remote programming. Latest serial number 595
Agilent 6674A 0-60V, 0-35A New old stock units.

1750

Agilent 6674A 0-60V, 0-35A Programmable System power supply. GPIB interface. IN STOCK! iv

1495

Agilent 6032A 0-60V, 0-50A, 1000Wt autoranging power supply. Programmable (GPIB) iii

1450

Kepco JQE75-8M 0 to 75V, 0 to 8A, Constant voltage or current mode. High resolution V/I control. List price $2095 pic

595

HP 6116A 0-100V, 0.2A Precision voltage setting with 0.1%+1mV accy, 200uV resolution.

290

Kikusui PAB110-0.6 0-110V, 0-0.6A.  CV or CC mode. LCD readouts. Analog programming. 00-0010

350

HP 6115A 0-100V, 0.8A max  Output voltage control with 4 digit accuracy. 450
Xantrex XFR100-12 0-100V, 0-12V System power supply. 1.5" height 1095
Agilent E3612A 0-120V, 500mA below 60V, 250mA above 60V. Constant voltage or current. 3.5 digit displays.

295

Agilent 6645A 0-120V, 0-1.5A. 3.5 digit setting accuracy. GPIB interface. Digital and analog front panel controls

795

HP 6443B 0-120V, 0-2.5A. Constant voltage or current. Fine adjustment controls.

395

Agilent 6675A 0-120V, 0-18A, Programmable power supply. iii 1250
Sorensen  DHP100-50M9D 0-100V, 0-50A Programmable lab power supply. Option M9D (GPIB interface). Line req. 200-240VAC, 3 Phase

1750

Sorensen  DHP130-115 0-130V, 0-115A Programmable lab power supply. Line requirements: 200-240VAC, 3 Phase 1950
Power Ten 4600D-15033 0-150V, 0-33A, LCD displays, Const current or voltage mode. Line requirements: 190-253VAC single or 3 phase 1350
Sorensen  DCR150-3B 0-150V, 0-3A,  Constant current or voltage mode.

495

Sorensen  DCR150-18B 0-150V, 0-18A,  Constant current or voltage mode. Line voltage: 115VAC 1950
Sorensen SGA160/31C 0-160V, 0-31A Programmable lab power supply.  Options 1AAA. GPIB and  RS-232 interface 2750
Sorensen SGA160/94C 0-160V, 0-94A.  Programmable lab power supply. Options 1AAA. GPIB and RS-232 interface   ii 2950
Sorensen  PRO160-62T1 0-160V, 0-62A. Line requirements: 208VAC, 3 Phase. 006 1950
Kikusui PAD160-7L 0-160V, 0-7A.  Constant duty power supply. CV or CC mode. Digital amp meter 1295
Kikusui PAD160-7L 0-160V, 0-7A.  Constant duty power supply. CV or CC mode. Digital amp meter 1295
Kepco ABC-200 0-200V, 0-150mA. 6.3VAC, Grid control output. CV or CC mode 175
HP 6030A 0-200V, 0-17A Constant voltage or current. GPIB interface.

1950

Kikusui PAB250-0.25 0-250V, 0-250mA.  CV or CC mode. LCD readout. Analog signal  remote programming 350
Sorensen XT250-0.25 0-250V, 0-250mA. Constant voltage or current  mode. 3 1/2 digit digital meters 395
Xantrex XTS250-0.25 0-250V, 0-250mA. Constant voltage or current  mode. 3 1/2 digit digital meters 395
Kepco HB4A 0-325V, in 5 ranges. 400mA. Constant voltage mode only. 195
Kikusui PAB350-0.1 0-350V, 0-1000mA.  CV or CC mode. LCD readout. Analog signal  remote programming 275
GR 1265A 0 to 400V, 0 to 5A (200Wt max) Const. voltage or constant current mode. Line regulation 0.2%. pic

490

HP 6035A 0-500V, 0-5A, 1000Wt, Constant voltage or current. GPIB interface. List price: $6925

2950

Sorensen DCR600-1.5B 0-600V, 0-1.5A, 900Wt, Constant voltage or current. GPIB control with HP59501B

1250

Bertan 230-01R 0-1000V, 15mA,  Reversable polarity, 3.5 digit LED. Analog remote control 

  750

Agilent G3170-80018 Bipolar HED power supply for the Agilent 5975 GC systems. Applied Kilovolts p/n HF007PZZ425 call
Agilent G1969-80108 Detector power supply for TOF III.  Applied Kilovolts p/n HP010RZZ366 call
Agilent G1946-80259A Detector power supply for 61XX series system. call
ISCO 494 0-2000V, 0-200mA ( 100mA @ 2000V )Constant voltage, current or power mode Electrophoresis power supply

290

Power Design HV-1547 0-3kV, 40mA. Positive/Neg output.  1V setting resolution.  

750

Bertan 205-10P 10kV, 2.5mA. Positive output.  1V setting resolution. Analog remote control 

1250

Bertan 205-10N 10kV, 2.5mA. Negative output.  1V setting resolution. Analog remote control 

950

Bertan 205-20R 20kV, 1mA,  Reversable polarity, 1V setting resolution. Analog remote control 

1195

Bertan 105-30R 30kV, 33mA,  Constant current or voltage mode. digital display, high resolution V/I controls, remote analog programming. 

call

DUAL OUTPUT LAB POWER SUPPLIES

Agilent E3648A 0-20V, 0-8V Dual output, 100Wt programmable power supply. GPIB & RS-232 interface. viii 695
HP 6621A Two outputs 0-20VDC@ 0-2A or 0-7V @ 0-10A, GPIB interface 650
HP 6227B 0-25V @ 0-2A. Dual output, CV/CC,Tracking mode. Low noise, single output winding produces continuous voltage up to 50V! 275
HP 6234A 0-25V @ 0.2A dual or 0-50V single @ 0.2A. Small size: 3.64"x6.17"x8.25". IN STOCK 195
HP 6253A 0-20 @ 0-3A ea., 0.01% regulation, 200uV rms ripple. Constant voltage or current mode. 295
HP 6255A 0-40 @ 0-1.5A ea. 0.01% regulation, 200uV rms ripple. Const. voltage or current modes. 275
Power Desing TW5005W Dual 0-50V, 0-0.5A output with tracking function. Single range with no output voltage jumps 175
Tektronix PS501-1 Precision power supply. 0-20 V with 10mV resolution setting 0-400mA, 5VDC @ 1A fixed output. For TEK TM series chassies 125
Topward TPS-3000 Dual 0-30V, 0-2A output with tracking function. Four separate meters for simultaneous monitoring of voltage and current  275
Xantrex 6060D 0-60 @ 0-1A dual output.. Same as two Xantrex XTS60-1 mounted in one chassi. Pic  295

TRIPPLE & QUAD OUTPUT LAB POWER SUPPLIES

Agilent E3631A Programmable bench power supply 0-6V @ 3A, +/-25V @ 1A. GPIB & RS232 interface 795
Agilent E3004-61030 Power supply for Agilent 94000 analog IC tester. call
Agilent 0950-3484 Power supply for Agilent E444XA series spectum analyzer. FLAT RATE REPAIR call
Agilent 0950-3384 Power supply for Agilent E865XA series VNA's and other models. FLAT RATE REPAIR call
Agilent 0950-4447 Power supply for Agilent E444XA series spectum analyzer. FLAT RATE REPAIR call
B&K 1602 0-400V, 200mA, 0-100V, 12.6VAC CT. Curent limiting control and AC output circuit breaker

390

B&K  1660 2x 0-30V @ 2A ea. and  4-6.5V @ 5A. Tracking mode. Series/Parallel LED displays. Pic  195
HP 6237B 0-18V @ 1A  and two 0-20V outputs at 0.5A each. Tracking mode.  IN STOCK ii 350
HP 6624A Quad output 0-7V @5A, 0-20V @2A, 0-50V @ 1A. Serial number 37XX iii 850
HP 6626A Quad output 0-7V or 0-50V. Precision power supply. 1.5mV/15uA programmable accuracy. ii 975
Kenwood PWR18-1T 2 of  0-18V @ 1A and  0-6V @ 5A. Tracking mode, 3 setup memory, output on/off sw.   Pic  250
Lambda LPT-7202FM 2 of 0-20V @ 1.5A each and  0-7V @ 5A. Separate volt and amp meters for each output. 275
Leader LPS-152 2 of  0-25V @ 1A and  0-6V @ 5A. Tracking mode. <3mV p-pk  ripple   Pic  IN STOCK 250
Leader LPS-152A 2 of  0-25V @ 1A and  0-6V @ 5A. Tracking mode. <3mV p-pk  ripple   Pic  IN STOCK 250
Philips PM2813 3 of 60V @ 5A each, 60Wt maximum. Programmable, with GPIB interface. PM2813/113 595
Power Design TP325 2 of 0-32V @ 1A each and 0-6V @ 5A Tracking mode. This P/S will not cause IC lockup on power up. Pic Specs iii 150
Power Design TP340 2 of 0-32V @ 1A each and 0-6V @ 5A or 0-15V @ 2.5A Tracking mode. This P/S will not cause IC lockup on power up. Pic   Specs vii 150
Power Design TP343A 2 of  0-25V @ 2A each and 0-6V @ 5A or 0-15V @ 2.5A. Tracking mode. This P/S will not cause IC lockup on power up. Pic Specs xiv 150
Sorensen LT18-5 2 of  0-18V @ 5A each, 5V @ 3A. 18V outputs can be used in series to double the voltage to 36V, or in parallel to get 10A. Info 350
Systron Donner TL8-3 2 of 0-32 @ 1A each,  0-8V @ 3A. Separate meters for each output. 295
Tektronix  PS503A 2 of 0-20V @ 0-1A max and  5V @ 1A. Tracking mode. For TEK TM500/5000 chassis only  125
Tektronix  PS280 2 of 0-30V @ 0-2A max and  5V @ 3A. Tracking, Parallel, Series modes on 30V outputs. IN STOCK. 195
Topward 4302D 2 of  0-25V @ 1A ea., 5V @ 3A.  LCD display, built in 3.5 digit voltmeter for measuring external voltage 195
Topward 6303A 2 of  0-30V @ 3A ea., 5V @ 5A.  Four  analog meters, Tracking mode, CV or CC mode. 295
Topward 6306D 2 of  0-30V @ 3A ea., 5V @ 5A.  Digital meters, Tracking mode, CV or CC mode. 395
Topward 6603D-10 2 of  0-60V @ 3A ea., 5V @ 5A.  Digital meters, Tracking mode, CV or CC mode.  495

CURRENT SOURCES

HP 4141B Programmable DC source/monitor for use in HP4062 semiconductor analysis systems 2500
HP 6177B  DC current source 0 to 500mA, 0-50V. 500uA resolution, 5mA, 50mA, 500mA range. 395
HP 6186B  DC current source 0 to 100mA, Up to 300VDC Compliance voltage. 3 ranges; 1mA, 10mA, 100mA  pic 750
Keithley 228 DC Current Source +/-100VDC, +/-1A, GPIB programmable, 3 Digit resolution. 750

UP TO 1 year  WARRANTY and 10 DAYS MONEY BACK 

NEED MORE INFO?  WE CAN E-MAIL TO YOU DATA OR  A PICTURE
Back To EquipTek Labs Home Page                E-MAIL US
Call:  650-261-1711   From 8:30 to 6 Pacific Standard Time

  04155-69013, 04145-65513, 04155-60003, FPS-1, FPS-2, 04155-69043, 04155-60043, FPST, 02160, 1731-3953, 33-3511, FPS-1, HP04155-60043, 33-4028, 5062-8229, AGILENT 0950-4599, 03108-4339,04396-61040, 04155-60013, HP 095-10097, HP 35672-67501, HP095-10097, E5250-61011, E5250-61001, E5250-61011, HP35672-67501, Voltex D2520